FeCrAl 23-5 / High Kutentha Kutentha Waya / Flat Waya
Amagwiritsidwa ntchito kwambiri mu chotenthetsera, chotenthetsera chinthu ndi chopinga, etc.
NiCr 80/20, NiCr 70/30, NiCr 60/15, NiCr 35/20
FeCrAl15-5, FeCrAl20-5,FeCrAl 25-5, ndi zina…
Constantan, Aloyi 30, Aloyi 60, Aloyi 90, etc.
Kukaniza kwamagetsi kuchokera ku 0.02 u ohm/m-1.53 u ohm/m
Ntchito Kutentha kuchokera 200 C mpaka 1400 C
Pls khalani omasuka kulumikizana nafe ngati pali funso.
NiCr:
RESISTOHM 20, RESISTOHM 30, RESISTOHM 40, RESISTOHM 60, RESISTOHM 70, RESISTOHM 80
FeCrAl:
RESISTOHM 125, RESISTOHM 135, RESISTOHM 140,
RESISTOHM 145, RESISTOHM 153
KuNi
Constantan, Cuprothal 5, Cuprothal 10, Cuprothal 15, Cuprothal 30, Eurica
FeCrAl Alloy Grade | Chemical Composition% | |||||||||
C | P | S | Mn | Si | Cr | Ni | Al | Fe | Re | Ena |
kuchuluka(≤) | ||||||||||
1Cr13Al4 | 0.12 | 0.025 | 0.025 | 0.7 | ≤1.00 | 12.5-15.0 | —- | 3.5-4.5 | 0.1 | Bali. |
0Cr15Al5 | 0.12 | 0.025 | 0.025 | 0.7 | ≤1.00 | 14.5-15.5 | —- | 4.5-5.3 | 0.1 | Bali. |
0Cr25Al5 | 0.06 | 0.025 | 0.025 | 0.7 | ≤0.60 | 23.0-26.0 | ≤0.60 | 4.5-6.5 | 0.1 | Bali. |
0Cr23Al5 | 0.06 | 0.025 | 0.025 | 0.7 | ≤0.60 | 20.5-23.5 | ≤0.60 | 4.2-5.3 | 0.1 | Bali. |
0Cr21Al6 | 0.06 | 0.025 | 0.025 | 0.7 | ≤1.00 | 19.0-22.0 | ≤0.60 | 5.0-7.0 | 0.1 | Bali. |
0Cr21Al4 | 0.06 | 0.025 | 0.025 | 0.7 | ≤1.00 | 21.0-23.0 | ≤0.60 | 3.0-5.2 | 0.1 | Bali. |
Mtengo wa 0Cr21Al6Nb | 0.05 | 0.025 | 0.025 | 0.7 | ≤0.60 | 21.0-23.0 | ≤0.60 | 5.0-7.0 | 0.1 | Bali. |
Chithunzi cha 0Cr27Al7Mo2 | 0.05 | 0.025 | 0.025 | 0.7 | ≤0.40 | 26.5-27.8 | ≤0.60 | 6.0-7.0 | 0.1 | Bali. |
Mapangidwe a Chemical ndi Katundu:
Katundu/Giredi | NiCr 80/20 | NiCr 70/30 | NiCr 60/15 | NiCr 35/20 | NiCr 30/20 | |
Main Chemical Kupanga (%) | Ni | Bali. | Bali. | 55.0-61.0 | 34.0-37.0 | 30.0-34.0 |
Cr | 20.0-23.0 | 28.0-31.0 | 15.0-18.0 | 18.0-21.0 | 18.0-21.0 | |
Fe | ≤ 1.0 | ≤ 1.0 | Bali. | Bali. | Bali. | |
Max Ntchito Kutentha(ºC) | 1200 | 1250 | 1150 | 1100 | 1100 | |
Kukaniza pa 20ºC (μ Ω · m) | 1.09 | 1.18 | 1.12 | 1.04 | 1.04 | |
Kachulukidwe (g/cm3) | 8.4 | 8.1 | 8.2 | 7.9 | 7.9 | |
Thermal Conductivity (KJ/m·h· ºC) | 60.3 | 45.2 | 45.2 | 43.8 | 43.8 | |
Coefficient of thermal Kukula(α × 10-6/ºC) | 18 | 17 | 17 | 19 | 19 | |
Melting Point(ºC) | 1400 | 1380 | 1390 | 1390 | 1390 | |
Kutalikira (%) | > 20 | > 20 | > 20 | > 20 | > 20 | |
Kapangidwe ka Micrographic | austenite | austenite | austenite | austenite | austenite | |
Maginito Katundu | zopanda maginito | zopanda maginito | zopanda maginito | zopanda maginito | zopanda maginito |
CuNi Alloys Grade | Kulimbana ndi magetsi (20degreeΩ mm²/m) | kutentha kokwana kukana (10 ^ 6/ digiri) | Kuchulukana g/mm² | Max. kutentha (digiri) | Malo osungunuka (digiri) |
KuNi1 | 0.03 | <1000 | 8.9 | 200 | 1085 |
KuNi2 | 0.05 | <1200 | 8.9 | 200 | 1090 |
KuNi6 | 0.10 | <600 | 8.9 | 220 | 1095 |
KuNi8 | 0.12 | <570 | 8.9 | 250 | 1097 |
KuNi10 | 0.15 | <500 | 8.9 | 250 | 1100 |
KuNi14 | 0.20 | <380 | 8.9 | 300 | 1115 |
KuNi19 | 0.25 | <250 | 8.9 | 300 | 1135 |
KuNi22 | 0.30 | <160 | 8.9 | 300 | 1150 |
KuNi30 | 0.35 | <100 | 8.9 | 350 | 1170 |
KuNi34 | 0.40 | -0 | 8.9 | 350 | 1180 |
KuNi40 | 0.48 | ± 40 | 8.9 | 400 | 1280 |
KuNi44 | 0.50 | <- 6 | 8.9 | 400 | 1280 |