Takulandilani kumasamba athu!

Permalloy E11c Ni79Mo4 79HM Waya Wofewa wa Magnetic Alloy

Kufotokozera Kwachidule:


Permalloy 80 ndi aloyi wa faifi tambala, chitsulo ndi molybdenum. Ndi aloyi yofewa ya maginito yokhala ndi maginito apamwamba kwambiri. Aloyiyo imakhala ndi mphamvu zochepa, pafupi ndi zero magnetostriction, komanso anisotropic magnetoresistance. Kutsika kwa magnetostriction ndikofunikira pakugwiritsa ntchito mafakitale,

pomwe kupsinjika kosinthika m'mafilimu owonda kungapangitse kusinthika kwakukulu kwamphamvu kwa maginito.


  • Model NO.:Permalloy
  • Kukaniza:0.55
  • Elongation (≥%):15-25
  • Gulu:E11C
  • Ndi:78.5-80.0%
  • Mbali:High Koyamba Permeability
  • Koyambira:China
  • Tsatanetsatane wa Zamalonda

    FAQ

    Zolemba Zamalonda

    Parameter

    TABLE 1 Zofunika Zamankhwala

    Element C≤ P≤ S≤ Mn Si Ku≤ Mo Ndi Fe
    Kupanga% 0.03 0.02 0.02 0.6-1.1 0.3-0.5 0.20 3.8-4.1 78.5-80.0 Zotsalira

    Ndemanga:

    Maonekedwe ndi kukula kwa ma alloys akugwirizana ndi GBn198-88

    TABLE 2 Zofunikira Zathupi

    Katundu Resitivity (μΩM) Kutalika (g/cm3) Curie Point.C High machulukitsidwe magneto-striction coefientλθ/10-6
    Mtengo 0.55 8.6 450 2

    TABLE 3 AC Magnetic Properties for Strip(Mphindi Mtengo)

    Makulidwe Pachimake pa mphamvu ya maginito ndi 0.1A/m, Pansi pa ma frequency osiyanasiyana osinthika maginito permeability μm/(mH/m)
    60Hz pa 400Hz 1khz pa 10KHz pa
    0.02 17.5 12.5
    0.05 18.8 9.4
    0.10 22.5 15
    0.20 12.5 7.5
    0.35 25 8.8

    TABLE 4 Coefficient of Linear Expansion at different Temperature/(x10-6)

    Temp 20-100 ° C 20-200ºC 20-300ºC 20-400ºC 20-500ºC 20-600ºC 20-700ºC
    Mtengo 1.3-10.8 10.9-11.2 14.4-12.9 11.9-12.5 12.3-13.2 12.7-13.4 13.1-13.6

    TABLE 5 Zofunikira za Magnetic (Mzere Wozizira Wozizira)

    Gulu I

    (δ&D)/mm μ0.08/(mHm)≥ μm(mHm)≥ Bs/T≥ Hc(A/M)≤
    0.005 12.5 44.0 0.75 6.4
    0.01 17.5 87.5 0.75 4.8
    0.02-0.04 20.0 112.5 0.75 4.0
    0.05-0.09 22.5 137.5 0.75 2.8
    0.10-0.19 25.0 162.5 0.75 2.0
    0.20-0.34 28.0 225.0 0.75 1.6
    0.35-1.00 30.0 250.0 0.75 1.2
    1.10-2.50 27.5 225.0 0.75 1.6
    2.50-3.00 26.3 187.5 0.75 2.0

    Gulu II

    (δ&D)/mm μ0.08/(mHm)≥ μm(mHm)≥ Bs/T≥ Hc(A/M)≤
    0.02-0.04 22.5 125.0 0.75 2.4
    0.05-0.09 25.0 150.0 0.75 2.0
    0.10-0.19 27.5 187.5 0.75 1.6
    0.20-0.34 31.3 250.0 0.75 1.2
    0.35 32.5 275.0 0.75 0.79

    Gulu III

    (δ&D)/mm μ0.08/(mHm)≥ μm(mHm)≥ Bs/T≥ Hc(A/M)≤
    0.01 25.0 150.0 0.73 2.4
    0.02-0.04 31.0 190.0 0.73 1.6
    0.05-0.09 38.0 250.0 0.73 1.2
    0.10-0.19 38.0 250.0 0.73 1.2
    0.20-0.34 38.0 280.0 0.73 1.0
    0.35 44.0 310.0 0.73 1.0

    Hot Rolling (forging) Flastspring

    (δ&D)/mm μ0.08/(mHm)≥ μm(mHm)≥ Bs/T≥ Hc(A/M)≤
    3-22 25.0 125 0.75 2.4

    Hot Rolling (Forging) Bar

    (δ&D)/mm μ0.08/(mHm)≥ μm(mHm)≥ Bs/T≥ Hc(A/M)≤
    8-100 25.0 125.0 0.75 2.4

  • Zam'mbuyo:
  • Ena:

  • Lembani uthenga wanu apa ndikutumiza kwa ife